LED’s
All currently selected energy level
indicators flashing.
Unit is overheated and is disabled
momentarily to cool down.
All energy level indicators flashing.
Unit is malfunctioning. Turn the unit
off, wait a few moments and try
again. If problem persists, the unit
should be returned for repair.
All LED’s flashing with
warning beep.
Treatment head is removed or
loose.
22
,
The unit appears to have cracks or is broken.
• Do not use if the unit is damaged. If you have concerns about using the unit, discontinue use and
contact the Remington® Service Centre for further assistance.
,
I have switched the unit ON, but I cannot increase or decrease the energy level.
• Try resetting the unit by turning it off and waiting several seconds before turning it back on.
,
The Bulb Status Indicator Light turns green but the unit does not flash when the button is pressed.
• Make sure the Skin Contact Sensor is in full contact with the skin.
• Try resetting the unit by turning it off and waiting several seconds before turning it back on.
,
There is a strange smell.
• Be sure the area is completely shaved before treatment.
,
The treated areas become red after treatment.
• This is normal and the redness should subside. If not, try using a lower energy level.
,
BE AWARE: If the unit is used over an extended period of time, the unit might automatically disable
momentarily (estimated 40 seconds) to cool down. Once the unit has cooled down, it will be ready to
use again.
LED’s
All currently selected energy level Unit is overheated and is disabled
momentarily to cool down.
All energy level indicators
Unit is malfunctioning. Turn the
try again. If problem persists, the
unit should be returned for repair.
beep
Treatment head is removed or
loose.
,
The unit appears to have cracks or is broken.
• Do not use if the unit is damaged. If you have concerns about using the unit, discontinue use and
contact the Remington® Service Centre for further assistance.
,
I have switched the unit ON, but I cannot increase or decrease the energy level.
• Try resetting the unit by turning it off and waiting several seconds before turning it back on.
,
The Bulb Status Indicator Light turns green but the unit does not flash when the button is pressed.
• Make sure the Skin Contact Sensor is in full contact with the skin.
• Try resetting the unit by turning it off and waiting several seconds before turning it back on.
,
There is a strange smell.
• Be sure the area is completely shaved before treatment.
,
The treated areas become red after treatment.
• This is normal and the redness should subside. If not, try using a lower energy level.
,
BE AWARE: If the unit is used over an extended period of time, the unit might automatically disable
momentarily (estimated 40 seconds) to cool down. Once the unit has cooled down, it will be ready to
use again.
LED’s
All currently selected energy level Unit is overheated and is disabled
momentarily to cool down.
All energy level indicators
Unit is malfunctioning. Turn the
try again. If problem persists, the
unit should be returned for repair.
beep
Treatment head is removed or
loose.
,
The unit appears to have cracks or is broken.
• Do not use if the unit is damaged. If you have concerns about using the unit, discontinue use and
contact the Remington® Service Centre for further assistance.
,
I have switched the unit ON, but I cannot increase or decrease the energy level.
• Try resetting the unit by turning it off and waiting several seconds before turning it back on.
,
The Bulb Status Indicator Light turns green but the unit does not flash when the button is pressed.
• Make sure the Skin Contact Sensor is in full contact with the skin.
• Try resetting the unit by turning it off and waiting several seconds before turning it back on.
,
There is a strange smell.
• Be sure the area is completely shaved before treatment.
,
The treated areas become red after treatment.
• This is normal and the redness should subside. If not, try using a lower energy level.
,
BE AWARE: If the unit is used over an extended period of time, the unit might automatically disable
momentarily (estimated 40 seconds) to cool down. Once the unit has cooled down, it will be ready to
use again.
LED’s
All currently selected energy level Unit is overheated and is disabled
momentarily to cool down.
All energy level indicators
Unit is malfunctioning. Turn the
try again. If problem persists, the
unit should be returned for repair.
beep
Treatment head is removed or
loose.
The Bulb Status Indicator Light turns green but the unit does not
flash when the button is pressed.
• Make sure the Skin Contact Sensor is in full contact with the skin.
• Try resetting the unit by turning it off and waiting several seconds before turning it back on.
There is a strange smell.
• Be sure the area is completely shaved before treatment.
The treated areas become red after treatment.
• This is normal and the redness should subside. If not, try using a lower energy level.
NOTE:
If the unit is used over an extended period of time, the unit might automatically
disable momentarily (estimated 40 seconds) to cool down. Once the unit has cooled
down, it will be ready to use again.
