18
• For Multi-Flash Mode, keep your finger on the Flash Button to keep it depressed and
glide to the next area being sure to keep the Skin Contact Sensors fully engaged. The
next flash will be delivered automatically after 3 seconds.
NOTE:
During Multi-Flash Mode if you let go of the Flash Button or lose skin contact,
simply resume treatment by repeating the above steps.
IMPORTANT:
The Facial Attachment Cap has been specifically
designed to treat the unique characteristics of female facial hair. We
would therefore advise against using the Body Attachment Cap on the
face as this has been designed to treat larger areas below the neck.
• The Facial Attachment Cap is only intended for use on female facial
hair on the cheeks, sideburns, chin, neck area and above the lips
(Fig 17). It can also be used on other smaller areas such as the
underarms and bikini area.
•
DO NOT
use on male beards or facial hair as the results may be permanent or uneven
which may produce changes in facial hair characteristics which may not be desirable.
• The Facial Attachment is only intended for use on female facial hair below the
cheekbone (Fig 17).
•
DO NOT
use on male beards or facial hair as the results may be permanent or uneven
which may produce changes in facial hair characteristics which may not be desirable.
Body Treatment
• For best results, avoid overlapping flashes. This helps prevent exposure to more energy
than is necessary to suppress hair growth. It also ensures that you get the maximum use
of the bulb.
• For the most effective results, always use the highest intensity level that does not cause
discomfort on the skin. The level you use should feel warm on your skin, but should never
cause discomfort.
• Store the unused attachment in a safe location (such as in the packaging) taking care not to damage
the Flash Window and other components.
• The i-LIGHT® is equipped with two operating modes: Single Flash Mode and Multi-Flash Mode.
Your i-LIGHT® device will automatically be set to Single Flash Mode each time the device is powered ON.
• Single Flash Mode: The i-LIGHT® will
each
time
the
Flash Button is pressed. This mode is ideal for
precision treatments of the face and small areas.
• Multi-Flash Mode: The i-LIGHT® device will
when the Flash Button is pressed and will continue to
,
How to treat:
•
,
NOTE: When the Skin Contact Sensors are fully engaged you will hear a ‘chirp’ and the Bulb Status
Indicator Display will illuminate green.
2
3 Move to the next area and treat in a grid like pattern to ensure full coverage of the treatment area.
• For Single-Flash Mode, press the Flash Button each time you move to the next area.
• For Multi-Flash Mode, keep your
on the Flash Button to keep it depressed and glide to the next
automatically after 3 seconds.
,
NOTE: During Multi-Flash Mode if you let go of the Flash Button or lose skin contact, simply resume
treatment by repeating the above steps.
,
Facial Treatment (female use only)
•
sensitive and more likely to be exposed to the sun’s UV rays; therefore treating
unwanted facial hair is
to treating the body – please be sure to read
the
Warnings and Safety Precautions carefully before beginning a facial treatment.
,
IMPORTANT: The Facial Attachment has been specially designed to treat the unique
characteristics of female facial hair. DO NOT use the Body Attachment on the face.
See section ‘Changing Attachments’ for more information.
Fig. 9
Fig. 10
TREATMENT TIPS
Fig 17
