NEVER LEAVE HEATER UNATTENDED WHILE BURNING,
CONNECTED TO A POWER SOURCE, OR WHILE
CONNECTED TO A FUEL SOURCE
© 2015, Pinnacle Products International, Inc.
Convection Heater User's Manual
Unpacking and Assembly
- Remove heater and base from carton (save
carton and packing materials for later storage)
- Remove all protective packaging protecting
heater during shipping.
- Place heater base on flat surface with wheels
on ground.
- Line up holes in bottom of heater cabinet with
locking tabs on top of base (see figure 2)
- Mount heater cabinet to heater base, sliding
tabs through holes in bottom of cabinet and
sliding cabinet backward approximately 1/4" or
until cabinet will not move further back.
- Use thumbscrews to attach heater cabinet to
heater base.
- Inspect heater closely for any damage that may
have occured during shipping. If there is any
damage, return the heater to place of purchase.
Connecting to Gas Supply
IMPORTANT! - Always use a propane (LP)
cylinder that has a connection device that is
compatible with the hose and regulator assembly
supplied.
- Remove the back cover by sliding the cover
straight up and away from the heater body.
Place the LP cylinder on the bottom plate and
replace the back cover.
- To connect LP cylinder, insert regulator end
fitting into cylinder valve, rotate coupling nut
clockwise and tighten firmly (see figure 3)
- Open valve on propane cylinder slowly. If the
valve is not opened slowly, the excess flow
check valve in the regulator will stop the flow of
gas. If this should happen, close the valve, wait
one minute (or until you hear the valve click),
and re-open, slowly.
- Be sure to inspect all connections for leaks, by
using a 50/50 mixture of dish soap and water on
all connection. Any bubbles forming indicate a
leak.
Missing Parts? Please Call 800-641-6996 For Assistance
5
The Propane (LP) gas
pressure regulator and hose
assembly supplied with the heater must be
used without alteration.
CAUTION
Be sure to inspect the
regulator hose before each
use. If the hose is cut or frayed, replace it
with the manufacturer suggested assembly.
CAUTION
