ENGLISH
6
the screw holes. The fixed blade is fitted with the raised profile pointing outwards and fixed
with the 2 screws.
Note that if the blades are not correctly aligned then cutting efficiency will be impaired.
Place a few drops of cutter or sewing machine oil onto the blades. Wipe off excess oil.
CAUTION:
Do not use liquid cleaners on the blades or harsh or corrosive chemicals on the blade
casing. Always use a soft brush to remove the accumulated hairs.
Unplug the charge adaptor from the power outlet when fitting or removing attachments, or
while cleaning the product.
Always store this appliance and cord in a moisture-free area.
Do not wrap the cord of the charging adaptor around the appliance.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR
INJURY TO PERSONS:
An appliance should never be left unattended when plugged into a power outlet.
Keep the power plug and cord away from heated surfaces.
Make sure the power plug and cord do not get wet.
Do not plug or unplug the shaver with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via the nearest
Remington
®
Service Centre.
Charge, use and store the product at a temperature between 15°C and 35°C.
Always unplug from the mains when cleaning.
Only use the parts supplied with the appliance.
Keep this product out of reach of children. The use of this appliance by persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge can give cause to
hazards. Persons responsible for their safety should give explicit instructions or supervise the
use of the appliance.
Suitable for cleaning under water.
PROTECT THE ENVIRONMENT
The product contains a Nickel Metal Hydride cell unit. Do not dispose the trimmer in
household waste at the end of its useful life. Disposal can take place at the nearest Remington
®
Service Centre or appropriate collection sites.
CAUTION:
Do not put in fire or mutilate your battery packs as they may burst or
release toxic materials.
100158_REM_IFU_HC5350_21L.indd 6
100158_REM_IFU_HC5350_21L.indd 6
26.03.10 11:32
26.03.10 11:32