6
•
To attach a comb, first ensure the adjustable zoom wheel is set to 1. Then slide on
the desired comb so that the comb rails align into the slots found at the top of the
trimmer head.
•
Select the comb length by rotating the zoom wheel upwards to increase the length
and downwards to decrease the length. Please see the table below for the different
length increments.
Setting
Short Comb
XL Comb
1
1.5 mm (Grade 0)
20 mm
2
2.5 mm (Grade 1)
21 mm
3
4 mm
22 mm (Grade 7)
4
5.5 mm (Grade 2)
23.5 mm
5
7 mm
25.5 mm (Grade 8)
6
9 mm (Grade 3)
27.5 mm
7
11 mm (Grade 4)
29.5 mm
8
14 mm (Grade 5)
32 mm
9
18 mm (Grade 6)
35 mm
•
To remove the comb, set the adjustable zoom wheel to 1 then pull the comb off the
beard trimmer.
•
For a more detailed, precision stubble look, fit the adjustable stubble comb which
can trim hair between 1 to 5mm. The cutting lengths increase in 0.5 increments.
•
Please note that the adjustable zoom wheel does not increase the length settings
on the stubble comb. To adjust these length settings, turn the dial found on the
back of the stubble comb which will then indicate the different trimming lengths to
choose from.
•
Note: The below instructions are recommended for those with or wanting to
trim beard hair between 1.5 to 18 mmin length.
BEARD BIB
The beard bib is designed to collect hair during trimming in order to prevent mess and
making disposal of hair clippings easier.
1. The suction hooks are designed to fix to a smooth non-porous surface such as a
mirror or ceramic bathroom tiles. Position them horizontally at about shoulder
height. Rotate the hook downwards to activate the suction hook (fig. D).
2. Fasten the bib around the neck then hook the loops over the suction hooks (fig. E)
3. When finished, leave the bib fastened around your neck then unhook the loops and
bring the two ends of the bib together. Keep the ends raised to contain the hair
clippings.
Содержание Crafter Beard MB4051
Страница 2: ...2 e f g i j k l m h A h B h C ...
Страница 3: ...3 h E F H J G h D ...
