![background image](http://html1.mh-extra.com/html/remington/482/482_operating-instructions-manual_1438524019.webp)
19
106088
PART NO.
DESCRIPTION
056415
Goggles
056485
Brush, 1/4 in.
056486
Brush, 5/8 in.
103754
Hex Wrench, 3/16 in.
102621
Accessory Muzzle Cap (for 3" pin)/Spall Shield Kit
103752
Hex wrench, 1/8 in.
Accessories
DISASSEMBLY
1. a.) Remove tang cap (1), compression
spring (2) and tang (3). If tang does not
drop out, thread 1/4-20 screw into tang
and pull out. Slide barrel assembly
from receiver (4).
2. Remove screw (9) in front of trigger
guard. Remove upper screw (10) from
recoil pad (11). Slide receiver (4) from
handle housing (12). Remove firing pin
(13) and firing pin spring (14). Remove
the recoil pad by removing the lower
pad screw (15).
3
2
1
b.) Remove muzzle cap (5) from barrel
(6) by unscrewing counterclockwise.
c.) Insert a rod or screwdriver into bar-
rel chamber (6) and push piston (7)
and buffer (8) out.
3. Replace barrel in receiver, align barrel
with ejector (16) and push breech (17)
to the rear. Remove set screw (18)
from breech. Turn and align firing pin
sear (19) with sear access hole. Re-
move sear and sear spring (20) from
breech Slide barrel and breech from
receiver.
Tool Disassembly and Assembly
!
WARNING ICON
G 001
WARNING: Always unload a powder actuated tool before disassembling,
replacing barrel, cleaning, or assembling.
Barrel Assembly
4
Continued
For parts and accessories, please contact your dealer or distributor. If they are unable to satisfy
your requirements, please contact DESA International at the locations as stated on back page.
482-93
5
6
8
7
6
13
14
12
11
10
15
9
4
17
16
18
19
20