Remii WM-55-XS, Инструкция по установке и эксплуатации, Страница: 18 / 24

18
10. Press “LOW” when the
display..
11. Press “HIGH” when the
display.
12. Press “TEMP” when
C-16-19-21-23-25-27-30
and Fahrenheit, H0-61-6
e heater is on, one setting of heater work
e heater is on, two settings of heater wor
n the heater is on to set the
0; Press this button for 5 seconds to swi
66-70-73-77-80-86.
ks, indicating “H1”on
rk, indicating “H2” on
room temperature,
itch between Celsius
NOTE: In “TEMP” mode, two settings of heater work. When the “HEATER ON/OFF” button is
locked, “HIGH”, “LOW”,”TEMP” can’t use.
7. Press “ADJUST”, rotate
8. Press “FLASH”, the tray
9. Press “HEATER ON/OF
“H2” on display; press a
indicating “LO”, heater
seconds, indicating “UL
unlocked. If the heater
“H1”,”H2” or “TEMP” to
es through the 13 colors of tray lighting.
y light cycles through all 13 colors.
FF” once to turn on the heater, in H2 settin
again to turn off the heater. Press this b
is off and the button is locked. Press th
L” on display, heater is still not workin
is on but the flame and tray light are of
indicate the heater’s working mode.
ng, 1500W, indicating
button for 5 seconds,
his button again for 5
ng but the button is
ff, there is display of