Remii WM-55-XS, Инструкция по установке и эксплуатации, Страница: 10 / 24

INSTALLATION- BUILT-IN
NOTE: Due to the many differe
you consult your local builder b
Preparation
1. Select a location that is not p
from combustible materials s
2. Mark the desired location o
place.
3. Prepare a wall with a fram
least 1/4” (6mm) around t
compliance with local and n
Prior to installing, test the applia
plugging the power supply cord
INSTALLATION
10
N
ent materials used to build walls, it is high
before you install this appliance on a wall.
prone to moisture and is located at least 0.9
such as curtains, drapes, furniture, bedding
on the floor and store the appliance in a sa
med opening to accommodate the size o
he edge of the appliance. Any new wir
national codes and other applicable regul
iance to make sure the appliance is fully o
d into a 120 Volt grounded outlet.
hly recommended that
.
.91m or 3 feet away
g, paper, etc.
afe, dry and dust free
of your unit. Leave at
ring must be done in
lations.
operational by
The rough wall opening size of
W(“)
SYM-50-XTRASLIM
SYM-60-XTRASLIM
f the fireplace:
D(“) H(“)
4 3/8 15 5/8 55 1/2
4 3/8 15 5/8 65 1/2
Screw
Screw
1. Unscrew 1 screw on each left and right side and push the front glass panel upward a bit
to take it off. (The screws are only for protection during transportation.)