REMEZair MultiShine Light RMGC-01, Руководство пользователя

Страница: 8 / 14

ENG
Step 1. Install the microfiber nozzle on
the holder and fix it with velcro.
Step 2. Pour the concentrate supplied
(2 caps of 10 ml) into the spray bottle and
add pure water.
For small surfaces, fill with pure water
up to the ½ mark and add 1 cap (10 ml) of
detergent.
For cleaning large surfaces, fill with clean
water up to the MAX mark, add 2 caps (20
ml) of detergent.
Step 3. Fix the washing nozzle.
ASSEMBLY OF THE APPLIANCE
OPERATING THE WINDOW VACUUM CLEANER
ACCUMULATOR CHARGING
• Fully charge the battery before first use.
• Before charging the device, make sure it is
turned off.
• Plug the charger into a power outlet.
• During charging, the indicator on the
appliance’s handle lights up red.
• When charging is completed, the indicator
turns blue.
• Use original charger only.
CLEANING CONTAMINATED SURFACES
Depend on your needs, choose one of the detergents
and add it to the water, in the proportions indicated
in the «Assembly of the appliance» paragraph.
Eco detergent for glass surfaces
Eco detergent for tiles
To apply the cleaning detergent, select the SPRAY/
STREAM mode on the spray nozzle and wipe off the
dirt with the microfiber nozzle.
Turn on the device by pressing the button once.
In operating mode, the indicator lights up constantly.
With the suction nozzle of the window vacuum
cleaner, moving from top to bottom, collect dirty
water, without streaks and drops.
Note: Hard-to-reach surfaces can be cleaned both in
the transverse direction and from top to bottom.
When using the 360° device, the volume of the dirty
water tank is 150 ml. When using the device in a
vertical position - 300 ml.
When the charge level is low, the indicator flashes
5 times, after which the device turns off.
CLEANING THE DIRTY WATER TANK
If the dirty water level in the tank has reached
the MAX mark, clean the tank.
1. Turn off the device.
2. Remove the removable reservoir as shown in
the diagram below.
3. Remove the rubber plug from the tank by
pulling the tab
4. Drain dirty water.
5. Insert the plug of the dirty water tank and put
it back into the appliance.
250 ml
( /
10 ml
+
150 ml
)
( /
20 ml
+
300 ml
)
х2
250 ml
SCHEME OF ASSEMBLY AND DISASSEMBLY
OF THE WINDOW VACUUM CLEANER