A
Maximum temperature of the circuit
Z
Water temperature in the circuit for an outside
temperature of 0°C
E
DAY
set point on the circuit
R
Outside temperature for which the maximum water
temperature in the circuit is reached
T
Value of the heating curve
This value corresponds to the parameter
HEAT.CURV.
When you modify the heating curve,
Z
and
T
are
recalculated and repositioned automatically.
n
Heating curve with BCT
The BCT (Base heat Curve Temperature) allows a minimum
operating temperature to be imposed on the heating circuit (this
temperature may be constant if the circuit gradient is nil).
A
Maximum temperature of the circuit
Z
Water temperature in the circuit for an outside
temperature of 0°C
E
DAY
set point on the circuit
R
Outside temperature for which the maximum water
temperature in the circuit is reached
T
Value of the heating curve
This value corresponds to the parameter
HEAT.CURV.
x
Value set to the parameter
HCZP D
When you modify the heating curve,
Z
and
T
are
recalculated and repositioned automatically.
5.6
Changing the settings
The boiler control panel is set for the most common heating
systems. With these settings, practically all heating systems operate
correctly. The user or installer can optimise the parameters according
to own preferences.
¼
For the user settings, refer to the user instructions.
20
0
-16
50
75
C°
C°
1.5
C002319-B
1
2
3
4
5
20
0
-15
64
50
75
C°
C°
0.7
C002320-B
1
2
X
3
4
5
iSense Pro DIN - AD280
5. Operating the appliance
12/04/2011 - 300025649-001-B
38
