REMEHA Celcia MC4, Инструкция по установке и эксплуатации

Страница: 21 / 64

21
1 SAFETY
1.1 General safety
The following pictograms are used in this Installation- and
Users manual to specifically draw certain points to your atten-
tion:
Tip
t
Useful tip or practical advice.
Indication

Important instruction in carrying out a
particular operation.
Warning
r
Possible danger of personal injury
or material damage to the regulator,
building or environment.
Danger
€
Serious personal injury can occur
because of risk of electric shocks.
1.2 Safety during assembly and installation
Observe the appropriate safety measures, as given in these
instructions.
2 INSTALLATION
2.1 Scale of delivery
The standard delivery of the Remeha Celcia MC4 includes:
- the Remeha Celcia MC4 cascade regulator;
- earthed
plug;
- drilling template and fixtures for wall mounting;
- strain relief clips and screws;
- ZAF 200 = outside temperature sensor;
- ZVF 210 = system flow temperature sensor;
- Installation- and Users manual.
2.2 Mounting and connecting the regulator
This chapter includes the guidelines and instructions for the
connection of the regulator, sensors, thermostats, regulators,
pump outlet and failure relay.
2.2.1 Mounting guidelines
•
Mount the regulator in an easily accessible position at eye
level at eye level.
•
Make sure it is near an earthed 230 VAC / 50HZ mains
connection. The mains lead supplied is 1.5 m long.
•
Ensure that the cable connection between the Celcia MC4
and other system components is as short as possible and
preferably not close to any other cables.
LT.AL.REM.000.002
GB