REMEHA CDR4 AD256, Инструкция по установке, эксплуатации и обслуживанию

Страница: 34 / 36

4 Troubleshooting
4.1 Display of the faults
If there is a malfunction, the remote control displays the message
Err;r
.
The generator’s control panel will show the corresponding error
message.
¼ To consult the cause of error messages, refer to the generator’s
installation and service manual (Chapter: Troubleshooting).
4.2 Checking the memory version of the remote control
Before contacting the installer, make a note of the memory version
installed in the remote control. Proceed as follows:
1. Press the
MODE
and
r
keys simultaneously for 5 seconds.
2. The
0
menu is displayed. Press the rotary button 3 times to display
the menu
3
. The memory version is shown to the right of the display.
To go back to the previous display, press the key
r
.
3. To return to the principal display, press the
MODE
key or wait 20
seconds.
4.3 Checking the memory version of the radio module
Before contacting the installer, make a note of the version of the
memory installed in the radio module. Proceed as follows:
1. Press the
MODE
and
r
keys simultaneously for 5 seconds.
A000857-A
5" +
MODE
r
C002543-C
MODE
r
x
2 4 5 6 7
0 2 4 6 8 10 12 14 16 18 22 24 20
1 3
A000857-A
5" +
MODE
r
4. Troubleshooting AD256
34 05/03/2015 - 300020556-001-04
EN