REMEHA CDR4 AD256, Инструкция по установке, эксплуатации и обслуживанию

Страница: 32 / 36

2. Press the rotary button to display the menu
1
.
To go back to the previous display, press the key
r
.
3. To modify the setting, turn the rotary button.
4. To return to the principal display, press the
MODE
key or wait 20
seconds.
3.2.5. Selecting the principal display
In the factory, the principal display is set to show the current time and
the outside temperature.
Other settings available:
4
The current time and the room temperature
4
The current time and alternately, every 5 seconds, the outside
temperature and the room temperature
To modify the principal display, proceed as follows:
1. Press the
MODE
and
r
keys simultaneously for 5 seconds. The
0
menu is displayed.
2. Press the rotary button 2 times to display the menu
2
.
To go back to the previous display, press the key
r
.
3. To modify the setting, turn the rotary button.
I : Outside temperature
O : Ambient temperature
I then O : Outside temperature alternating with room temperature
4. To return to the principal display, press the
MODE
key or wait 20
seconds.
3.2.6. Displaying the estimated energy
consumption
The remote control allows you to display the estimated energy
consumption per use. The energy consumption displayed is the running
total of consumption based on activation of the function on the heating
appliance display. It is possible to reset the estimated energy
consumption from the heating appliance display.
C002542-C
MODE
r
x
2 4 5 6 7
0 2 4 6 8 10 12 14 16 18 22 24 20
1 3
A000857-A
5" +
MODE
r
C002390-B
MODE
r
x
2 4 5 6 7
0 2 4 6 8 10 12 14 16 18 22 24 20
1 3
a
3. Operating instructions AD256
32 05/03/2015 - 300020556-001-04
EN