REMdevice T3 @ 2G4, Инструкция по эксплуатации

Страница: 13 / 14

Instruction Manual
Radio control devices T3, T5 and T7 @
2G4
version 1.3 January 14
REM
device
®
- ITALY
page 25 of 28
Description of the coupling telegram
The telegram has a constant length, composed of 160 bits:
•
64 bits are dedicated to the start line;
•
48 bits are assigned to the coupling address between receiver and
transmitter;
•
16 bits implement a protection algorithm with a marked probability
of detecting errors lower than 10
-8
(less than 1 in 100,000,000);
•
24 bits are used for the control code.
•
8 bits are used for setup
The 48 address bits are used to couple the transmitter to the receiver
with a code which is set by the manufacturer and assigned univocally
to each radio control device produced using the new and exclusive
“REMSYS CODE” system.
Instruction Manual
Radio control devices T3, T5 and T7 @
2G4
version 1.3 January 14
page 26 of 28
REM
device
®
- ITALY
IDENTIFICATION OF THE FUSES
Receiver (fig. 5)
•
STOP RELAY fuse 5x20 4 A
•
Power supply fuse
Power supply 24-48 Vdc 5x20 1 A
Power supply 115 Vac/Vdc 5x20 0.5 A
Power supply 230 Vac/Vdc 5x20 0.5 A