
91424
26
MANUAL FILLING
In the event that the icemaker is not functioning, the hopper may be manually filled with ice.
1. Remove the lower front louvered panel.
2. Put the stop/run switch in the “stop”position.
3. Open the hinged top cabinet.
WARNING: Electrical power is on to the agitator motor and gate solenoid. Avoid contact
with these components.
4. Remove the ice storage hopper cover.
5. Fill hopper with ice and replace cover. The unit is now ready for dispensing.
CAUTION: Do not use crushed of flaked ice.
Use of bagged ice, which has frozen into large chunks can void warranty. The agitator is
not designed to be and ice crusher. Use of large chunks of ice which “jam up” inside the
hopper will cause failure of the agitator motor and damage the hopper. If bagged ice is used it
must be carefully and completely broken into small, cube-size pieces before filling into the storage
hopper. Dot not allow foreign material to enter the ice storage hopper.