Contact Closure
(Momentary)
RS-485 (RS-232)
Control
Connection
Application
IR Sensor
AVA-200+
Down(Pink)
Up(Purple)
Common(Orange)
Up
+
+
....
Down
Stop
Com
Stop(Grey)
1D
1S
1U
COM
For control by an A/V control system (e.g. AMX or Creston) or a Touch-Contact
Switch (Remaco AVA-200+)
* For this zero voltage Contact Closure, any DC voltage exceeding 3V might
damage the MPC
* Works on momentary contact closure only. (Dry contact, normally open)
For connection to an IR Sensor
- To be used in conjunction with a remote controller for controlling of equipments
* Maximum cable length between IR Sensor and MPC is up to 1.45m.
GND
IR
OUT
VCC
(Yellow)
IR Sensor ( )
(Red)
Item only
available in
Bundle Pack
Max 1.45m
(Blue)
MPC-851 can be remotely controlled by using commands send through serial or
USB port. MPC can be configured to “Independent Mode” or “Combine Mode”
by the given software “MPC-851 Program.exe”
*For more details, download from Remaco Website www.remacotech.com
B (Rx)
A (Gnd)
RS-485
(RS-232)
Lower Limit
less screen drop (anti-clockwise)
more screen drop
(clockwise)
Alen Key Adjusting Tool
(to set knob limit switch)
+
-
Less
More
-
+
Orange Knob
DOWN
To set screen to your desired “up” and “down” positions.
Upper Limit
screen roll away
from frame (anti-clockwise)
screen roll into the frame
(clockwise)
Screen Frame
Bottom View
+
-
+
-
More Less
+
-
-
+
White Knob
Orange Knob
UP
