End
Details action and observation:
Connect motors and
power to MPC according
to diagram.
Switch on
power supply
Press and hold the
learning button,
do not release.
Motor will
step-move up
and down
Set AVA -316 RF
remote to CH “1”
Press the
“UP” button
1. Connect motors and power to MPC according to diagram.
2. Switch on power supply.
3. Press and hold the learning button, do not release. Motor will step-move up and down
4. Wait for LED to start flashing, and then release holding the
Learning Button
.
(Wiring Diagram - Page 2)
5. To pair motor 1, set the channel at the AVA-316 RF remote to “1”.
6. Press the “UP” button. Motor 1 w ill step-move up and down. LED stops flashing. AVA-316 RF remote CH1 is now paired with
motor 1.
7. To pair motor 2, repeat above step 1 to 6
** If nothing is pressed within 20 seconds, motor will revert back to working mode automatically with a step move up and down.
Pairing MPC-851 with AVA-316-RF 15 Ch
MPC-851 compatible with AVA-316 15-Channel Radio Frequency Remote
Stop button
Down button
Channel -
C
LCD screen
Up button
AVA-316-RF 15Ch
OPTION 1
Setting Number of Channels Used AVA-316 15-Channel RF Remote
OK
Setting
is OK
5
C
15
8
Press
Channel ‘<’ & ‘>’
together
The screen
will display C
The screen
will display 15
Press
Channel ‘<’ & ‘>’
together
Select the number of channel required
Example ‘2’ by pressing
‘<’ or ‘>’
Stop X1
The screen
will display 0
Or
15
LED starts
flashing
Release
holding the
learning button
Motor will
step-move
up and down
LED stops
flashing
AVA-316 RF remote CH “1”
is now paired with motor 1
OPTION 2
Control by Network IP Address
Connecting to Network IP
• Connect MPC-852 to the local Ethernet connection
• Connect PC or Laptop or Mobile to LAN or WiFi.
Must be connected to the same network.
• Go to browser (Google Chrome recommended)
• Type in the initial IP Address is
192.168.1.200
• Login Details
User name:
admin
Password:
mpc852
For more information (Website):
www.remacotech.com > Downloads > Installation Guides > Remote Controls, Electronics & Accessories >
MPC-852
