DE
UT
S
CH
16
7.2. MIDI-zuweisungstabelle
sw naMe
TyPe
MIDI
MIDI2(shIfT)
ReMaRks
TRAX
SW/ENC
35/35
74/74
CH1 Only
DRY/WET/FX SEL
SW/ENC/VR/LED
1D/--/1D/1D
5C/5C/--/5C
LED:0~7F(0~127) MIDI2 Only DeckC/D
PARAM 1/FX SEL
SW/ENC/VR/LED
1E/--/1E/1E
5D/5D/--/5D
LED:0~7F(0~127) MIDI2 Only DeckC/D
PARAM 2/FX SEL
SW/ENC/VR/LED
1F/--/1F/1F
5E/5E/--/5E
LED:0~7F(0~127) MIDI2 Only DeckC/D
PARAM 2/FX SEL
SW/ENC/VR/LED
20/--/20/20
5F/5F/--/5F
LED:0~7F(0~127) MIDI2 Only DeckC/D
SIZE/SET
SW/ENC
2B/2B
6A/6A
MOVE/ACT
SW/ENC
2C/2C
6B/6B
SIZE/SET(Remix Mode)
SW/ENC
2D/2D
6C/6C
CH1 Only
MOVE/ACT(Remix Mode)
SW/ENC
2E/2E
6D/6D
CH1 Only
JOG (Scratch)
SW/ENC
22/22
61/61
Scratch ON
JOG (Search)
SW/ENC
26/26
65/65
Search ON
JOG
SW/ENC
28/28
67/67
Remix Jog(Scratch)
SW/ENC
25/25
64/64
Scratch ON & Remix ON(DeckA/B only)
Remix Jog(Search)
SW/ENC
37/02
76/41
Search ON & Remix ON(DeckA/B only)
Remix Jog
SW/ENC
38/01
77/40
Remix ON(DeckA/B only)
PITCH(Remix Mode)
VR/CENTER
39/39
78/78
PITCH
PITCHBEND
PITCHBEND
--
GAIN
VR/Low
79/79
--
HIGH
VR/Low
7A/7A
--
MID
VR/Low
7B/7B
--
LOW
VR/Low
7C/7C
--
CH FADER
VR/Low/
Faderstart
31/31/27
--
Low/Faderstart:Shift+Mon Cue (LED on)
CH FADER(Remix Mode)
VR
70
--
FILTER/KEY
VR/CENTER
32/32
71/71
SAMPLE DECK C VOL
VR
33
72
DeckC/DeckD only
CUEMIX FADER
VR
36
--
CH1 Only
CROSSFADER
VR
37
--
CH1 Only
CF CUREV
VR
38
--
CH1 Only
FX ON
SW/LED
01/01
40/40
FX B1
SW/LED
02/02
41/41
FX B2
SW/LED
03/03
42/42
FX B3
SW/LED
04/04
43/43
-4 BEAT
SW/LED/FLSH
05/05/30
44/44/6F
-1 BEAT
SW/LED/FLSH
06/06/53
45/45/67
+1 BEAT
SW/LED/FLSH
07/07/49
46/46/66
+4 BEAT
SW/LED/FLSH
08/08/48
47/47/60
ROLL
SW/LED
09/--
--/--
MASH
SW/LED
0A/--
--/--
1
SW/LED
0B/0B
4A/4A
2
SW/LED
0C/0C
4B/4B
3
SW/LED
0D/0D
4C/4C
4
SW/LED
0E/0E
4D/4D
1(ROLL)
SW/LED
0F/0F
--
LED: 0~7F(0~127) *2
2(ROLL)
SW/LED
10/10
--
LED: 0~7F(0~127) *2
3(ROLL)
SW/LED
11/11
--
LED: 0~7F(0~127) *2
4(ROLL)
SW/LED
12/12
--
LED: 0~7F(0~127) *2
1(MASH)
SW/SW2/SW3/LED
23/62/4E/23
--
LED: 0~7F(0~127) *2
2(MASH)
SW/SW2/SW3/LED
24/63/4F/24
--
LED: 0~7F(0~127) *2
3(MASH)
SW/SW2/SW3/LED
33/72/50/33
--
LED: 0~7F(0~127) *2
4(MASH)
SW/SW2/SW3/LED
36/73/51/36
--
LED: 0~7F(0~127) *2
SAMPLE MODE
SW/LED
13/13
52/52
LED& Non-Shift SW/LED -> MIDI Preset 2
REMIX MODE
SW/LED
14/--
--/--
FX1(Search)
SW/LED
15/--
54/54
FX2(Scratch)
SW/LED
16/--
55/55
MASTER
SW/LED
17/17
56/56
KEYLOCK(KEY)
SW/LED
18/18
57/57
FX MODE(FX ON)
SW/LED
19/19
58/58
TAP(CUE)
SW/LED
1A/1A
59/59
LOAD
SW/LED
1B/1B
5A/1B
FADERSTART
SW/LED
1C/1C
5B/--
SHIFT(DEL)
SW
34
--
PITCH BEND -
SW
29
68
PITCH BEND +
SW
2A
69
A
SW
3B
--
CH1 Only
C
SW
3C
--
CH1 Only
IN1
SW
3A
--
CH1 Only
IN2
SW
3D
--
CH1 Only
D
SW
3F
--
CH1 Only
B
SW
3E
--
CH1 Only
DRY/WET/FX SEL
LED
..
5C
0~7F(0~127) *1
PARAM 1/FX SEL
LED
..
5D
0~7F(0~127) *1
PARAM 2/FX SEL
LED
..
5E
0~7F(0~127) *1
PARAM 3/FX SEL
LED
..
5F
0~7F(0~127) *1
Level meter L
LEVEL
21
--
CH1 Only 0~A(0~10)
Level meter R
LEVEL
09
--
CH1 Only 0~A(0~10)
cc-aBsoluTe (vR)
Control Change messages are sent
with status 0xBn, where n is the
channel, for the specified CC con
-
troller. Thus the controller MIDI ID
is indicated with the channel along
with the CC number. The value from
0x00 to 0x7F, directly related to
the location of the controller.
cc-RelaTIve (enc)
Control Change messages are sta-
tus 0xBn, where n is the channel,
for the specified CC controller.
Thus the controller MIDI ID is
indicated with the channel along
with the CC number. The value from
0x40 to indicate the change in the
controller. This is an offset to 0x40
“one’s complement” notation.
A message with data 0x43 indica-
tes a positive change of 3.
A messages with data 0x31 indica-
tes a negative change of 15.
SWITCH ON/OFF (Low,Faderstart,
sw,cenTeR,cw,ccw)
These messages are used for
switches.
Control Change messages are sent
with status 0x9n, SWITCH On and
Off value are 0x7F and 0x00, where
n is the channel.
LED ON/OFF (LED)
These messages are used for LED.
Control Change messages are sent
with status 0x9n, LED On and Off
value are 0x7F and 0x00, where n
is the channel.
PITchBenD
Pitchbend messages are status
0xEn, where n is the channel, for
the specified controller.
Thus the controller ID is indicated
only by the channel.
For accurate changes, the 14 bit
data in a pitch bend message is
reserved for absolute controllers
which require more than 7 bits
of data.
level leD (level)
These messages are used for
LEVEL.
Control Change messages are sent
with status 0x9n, LED Off value
is 0x00 and On value is related to
LED amount, 0x01 with one LED,
0x02 with two LED…., where n is
the channel.
*1 LED RINGS CODE
00~08 => 0
=> ALL LED OFF
09~17 => 9
=> 1 LED ON
18~26 => 18
=> 2 LEDS ON
27~35 => 27 => 3 LEDS ON
117~127 => 117 => ALL LEDS ON
*2
0 > 42
= Blue + Red (violet)
43 > 85 = Blue
86 > 127 = Red
