P
VII
: 1st audio device
In the preferences you can set your respective sound card.
P
VIII
/ P
IX
/ P
X
: 2nd audio device
If you have a sound card with at least four channels or a second sound card you
can select and enable it here . If you wish to adjust the latency for optimization
enable the “Device Parameter” -PIX- and adjust the latency via the knob -PX-.
NOTE!
Should you notice any clicking noise or if the music fails completely due to
low latency you must increase the latency via the knob -PX-.
P
XI
/ P
XII
: 3rd audio device
Reloop Attack supports up to three sound cards. Check mark field -PXI- in order
to select and enable the third sound card -PXII-.
PX
III
: Type
Here you can adjust your preferred and supported sound card routing. Please
refer to the following list:
P
XIV
/ P
XV
/ P
XVI
: Channel setting
Under the items -PXIV / PXV / PXVI- the preferences for the respective channels
for the mixed output, headphones and if necessary the right deck can be seleted.
P
XVII
/ P
XVIII
/ P
XIX
: Record device
With -PXVII- you can enable the input. In the preferences -PXVIII- select the
respective sound card input and under preferences -PXIX- the respective type.
Here it is possible to assign a microphone for example.
50
ENGLISH
2 channels
mixed stereo output (standard)
4 channels
1 x mixed stereo output;
1 x stereo headphones output
4 channels (external)
this type is used for the connection of an external mixer
and the internal equalizer and gain will be bypassed. 2 x
stereo output
6 channels
2 x mixed stereo output;
1 x stereo headphones output
2 channels x 2
1 x mixed stereo output and 1 x headphones output on 2
different sound cards
2 x channels x 2
(external)
this type is used for the connection of an external mixer
and the internal equalizer and gain will be bypassed. 2 x
stero outputs on two different sound cards
2 channels x 3
2 x mixed stereo output on 2 sound cards;
1 x stereo headphones output on 3 different sound cards
