13
4.0 Select the Dome Camera ID to be controlled
【
CAM
】
＋
【
N
】
＋
【
Enter
】
(N: Camera Number, range 0~255)
First click the “CAM”
，
then input the number N (address) of the Dome Camera
to be controlled, and then click “Enter”. When the number N is consistent with the
Camera’s address, the Dome Camera is ready to be controlled.
For example: Control No.2 Dome Camera
a. Click “CAM”. (The screen shows as picture 13)
b. Input “2”
c. Click “Enter”. (The screen shows as picture 14)
Picture 13
Picture 14
4.1 Set and Call Preset Position
Preset function is that the position parameters of horizontal angle, vertical angle,
and lens focus are stored into Dome Camera with the number (1-128). When needed,
these parameters can be transferred to adjust the Dome Camera to a fixed position.
Users can conveniently store and call the preset positions by controlling keyboard.
This kind of camera support 128 preset positions.
