Relong 3804D Скачать руководство пользователя страница 2

Страница: 2 / 63

VR-3800D Series Digital Video Recorder

Welcome

Thank you for purchasing Relong products.

Please feel free to contact us if you have any

questions or concern s.

This manual applies to

RL-VR-3800D digital video recorder.

The manual may not agree with the real functions or operation of the product and there

may be some inaccuracies and misprints. Relong reserves the right to change specifications or

functions described in this manual without notice and without obligation.

Safety Precaution

Do abide by the following precautions when using this product:

1. Containers with liquid should not be put on DVR.

2. DVR should be put at well-ventilated places.

3. DVR should work under the allowable limit of temperature and humidity.

4. Short-circuit will be caused when circuit board inside the DVR is damp, so please dusting

the circuit board ,connector ,case and case fan with banister brush.

UnRegister

Содержание 3804D
































































Результаты поиска

Содержание 3804D

Отзывы:

Relong 3804D, Руководство пользователя, Страница: 2 / 63

Результаты поиска

Содержание 3804D

Отзывы: