2.6
Mods Enhanced
Settings
Channel Settings
unit into the
“Dealer
for editing
the channel
settings, do the following:
1.
pressing and holding the [LAMP] and
buttons, switch the
“on’. After 2
seconds the radio enters the dealer mode and
appears on the display.
2. While in
mode, press
to enter the Channel Setting mode.
Table 2.7 shows the
options that can be selected while in this mode. While in this
mode, the Channel
knob is used to set functions “ON“ or “OFF” or to select the
setting. After a function is set,
the
button stores the setting and increments the
menu to the next function option.
Also,
when the
button is pushed, a beep will sound to
confirm the setting.
the
button
at any
time while reviewing the function options will cause the unit
exit the selection mode and revert back to the dealer mode screen. The current function option
be
if it was changed. After the complete option list
has been
through,
‘End” will appear on
display, To exit dealer mode,
the power
and then back
Page
