Page 6 of 11
3. Before Using For The First Time
•
Remove all packaging and dispose of thoughtfully.
•
Wash the beaker in warm soapy water.
•
Ensuring the product is unplugged from the power, clean the mixing blade and
shaft with a damp cloth and dry thoroughly before use.
WARNING:
Do not immerse the motor housing in water or any other liquid.
Misuse of this appliance may result in serious injury.
Take care when cleaning the mixing blade.
4. To Use the Milkshake Maker
Ensure that the 2 speed switch is in the “0” position.
•
Place ingredients to be mixed in the beaker, being careful not to fill above the
maximum level.
•
Place the beaker into the Milkshake Maker, ensuring the top of the beaker is
located in the slot of the interlocking switch, then lift up and swing the beaker
inward at the bottom and rest on the beaker support.
•
Plug in, switch on and while holding the appliance steady, press the 2-speed
switch to either “I” or “II” to start mixing.
Note
: If ingredients splash out of the beaker, reduce the speed or liquid level.
•
When mixing is complete, press the 2 speed switch back to the “0” position.
•
Remove the beaker by swinging it out and then down.
•
Pour the drink into a cold glass or beaker and serve immediately.
Note
: Do not run the Milkshake Maker continuously for more than 3 minutes at a
time, as doing so will overheat the motor and reduce the life of the appliance.
Allow 10 minutes rest between uses.
