Reliance electric S-ABS II Card, Инструкция по эксплуатации

Страница: 36 / 52

D-2
PSC5000 Serial Absolute Encoder Input Card II S-D4024
Electrical Characteristics (Standard Ta = 25 degree C)
- Main power voltage : Minimum 10.0 V
Maximum 13.2 V
Typical 12.0 V
With ripple content less than 1%
- Operation mode switching
voltage
: From usual operation to energy saving
operation:
Typical
6.5 V
From energy saving operation to usual
operation:
Typical
6.3 V
- System down voltage : External battery voltage: Maximum 2.40 V
- Clearing time : Minimum 2.0 seconds
Maximum 4.0 seconds
With clearing interval of 5 seconds or
longer:
- Time period to be required for
sending data after main power
is turned ON
: Typical 0.05 seconds
Maximum 0.1 second
With fully charged internal battery,
Vcc = 4.75 V,
Power supply impedance = 0
- Operating time of 3-second timer: Minimum 2.5 seconds
Maximum 4.0 seconds
- Current consumption of main
power:
Typical 300 milli-amps
Maximum 350 milli-amps
At usual operation (no load of line driver)
- Current consumption of external
battery
: When 3-second timer operates:
Typical
2 milli-amps
Maximum 10 milli-amps
During energy saving operation:
Typical
25 micro-amps
Maximum 50 micro-amps
- Response revolution number : During usual operation:
Maximum
4500 r/min
When 3-second timer operates:
Maximum
4500 r/min
During energy saving operation:
Maximum
100 r/min
- Maximum response frequency : During usual operation:
Maximum
200 kHz