Reliance electric MD65, Инструкция по эксплуатации

Страница: 113 / 180

Viewing the Module’s Web Pages
10-11
10.2.5 Configure Process Display Web Page
The Configure Process Display web page enables you to set a
host’s parameters whose values you want shown in “Process
status” fields on the Home page and the Process Display pop-up
window. (When the module is operated in Multi-Drive mode, the
Home Page does not show a “Process status” field for a host.) By
default, this configuration is not protected. After configuration, the
settings can be protected by setting Web Features (parameter 30)
Proc Dsp Cfg Bit 1 value to “0” (Disabled). To change a protected
configuration, it must first be unprotected by setting the Proc Dsp
Cfg Bit 1 value back to “1” (Enabled).
Step 1. To set a host’s parameters whose values you want shown
on Lines 1, 2, and 3 of the “Process status” fields in both
the Home Page (only Single mode) and Process Display
pop-up window, type the corresponding parameter
number in each box.
Step 2. Click Save Changes.
Information Description
Line 1 - parameter # Number of parameter whose value you
want on Line 1.
Line 2 - parameter # Number of parameter whose value you
want on Line 2.
Line 3 - parameter # Number of parameter whose value you
want on Line 3.