Reliable Sensor Velocity v200, Инструкция по эксплуатации, Страница: 13 / 40

08
At that moment a prolonged buzzer will sound and the three indicators will
momentarily light up. The light indicator of the temperature selected, (••), (•••)
or MAX will continue to flicker, indicating that the appliance has been switched
off.
To switch it on again, simply take hold of the handle. A buzzer will sound and the
V200 will return to the temperature and steam position selected before it was
switched off.
Remember that the period between being switched off and switched back on again
will affect the time that it takes for the V200 to reach the desired temperature.
STEAM READY FEATURE
For those who want to leave their iron on for periods longer than 8 minutes at
a time (without the automatic shut off system activating) the Sensor Velocity
V200 has a STEAM READY feature that allows the iron to stay on indefinitely.
To activate this feature, simply press the maximum steam flow button (6) for 5
seconds (Fig. 4)
After holding the Steam Button for 8 seconds, the LEDs will flash for 5 seconds
indicating that the auto shut off has been deactivated.
To activate the auto shut off again, the V200 needs to be unplugged and then
plugged in again.
Do not leave your iron unattended while the Steam Ready feature is activated.
FILLING WITH WATER
If while ironing the tank runs out of water, the three lights will start to flicker at a
frequency of 1 second.
1. Switch off the V200, keep it upright and fill the tank using the beaker
(8) provided.
Dry the V200 with a dry cloth if any of the water spills out of the tank. Z If the
appliance were to run out of water completely with the steam selector activated,
you would hear a strange noise from the micro-pump. Switch off the steam selec-
tor to prevent any damage to the system. Switch off the appliance.
VERTICAL IRONING
It enables you to remove creases from delicate garments without having to lay
then on the ironing board: jackets, coats, curtains, suede garments, etc.
1. Place the garment on a hanger, away from the other garments, persons...
2. Select the desired ironing temperature with the temperature selector (3),
stand the V200 upright and press either of the two steam buttons (5 or 6).
At Position (••) you will obtain a more humid visible steam which will be easier to
see, whereas at Position (•••) and (MAX) the steam is drier and, although the
same flow is maintained, will be less visible.