Reliable Empressa S330, Инструкция по эксплуатации

Страница: 10 / 47

08
b. When the green ready light goes off, the pressing plate has reached the tem-
perature for the desired setting.
c. When changing the setting from a higher selection to a lower setting allow sev-
eral minutes for the pressing plate to cool sufficiently after making the change.
IMPORTANT NOTE: You may find it more efficient to arrange your fabrics from
those requiring the lowest setting to those requiring the highest setting and
proceed accordingly. This will avoid any unnecessary delay or wait for the
pressing plate to cool.
STEP 5: STEAM CONTROL
IMPORTANT NOTE: Steam is produced only when the yellow steam ready light is on.
The green ready light goes off when the unit has reached the desired temperature.
The yellow steam ready light will come on when the unit is ready to produce steam.
IMPORTANT NOTE: If this is the first time you are using the steam press or you
have been storing it for some time, lift the pressing plate into the raised position
and press the steam burst button several times until the steam begins to flow.
IMPORTANT NOTE: The steam burst function can only be used when the steam
ready light is on AND the steam press is in a slightly opened position. Do not use
the steam burst function when the steam press is closed, or you may damage
the unit.
IMPORTANT NOTE: Do not press the steam burst button for more than 5 seconds
or water may drip on your garment.
STEAM BURST BUTTON