Auto Closing Time :
10 sec
Digital Conference System
5) Unit volume
The unit volume is the output volume of the built-in speaker of the
conference unit. The adjustment range is between -30dB and 0dB.
Press up and down keys to enter "unit volume", press "Enter" key to enter
the following interface:
22
5.6.3 Voice activated mode
During the conference, due to the capacity of the conference unit to
speak and the speech mode (when the chairman priority key is on, the
chairman unit is unlimited to the speech capacity and mode of speaking), if
the delegate unit fails to turn off the microphone after the speech ends, Will
affect other speakers. Therefore, the moderator can switch to "voice mode"
as shown below and press "Enter" to enter the following interface to set the
microphone auto-off time.
Press the up and down keys to adjust the auto-off time, the adjustment
range is 1 ~ 15s, the system default auto-off time is 10s, press the "Enter"
key to confirm the setting, so that after the conference unit finishes
speaking, the system starts to count, shutdown automatically, in order to
protect the normal and orderly meetings.
Unit
Volume
-30dB
0dB
5.6.4
Address setting
Press Up and Down keys to switch to "3. Address Setting" and press
"Enter" key to enter the following interface:
Manual
Setting
1
First ID
1) Manually set, you can manually update the ID address of some conference
units or the ID address of all conference units. Through the up and down
keys, adjust the first address of the conference unit. The adjustment range
of the first address is 1 ~ 249. After adjusting, press "Enter " key, the
system starts to set the address, and the conference central controller LCD
screen displays the following interface:
