background image

7

Avertissement

  

Cet article est lourd. Pour éviter tout risque de blessure, prendre soin lors de la manipulation.
L’ appareil ne doit pas être exposé à des éclaboussures et aucun objet rempli de liquide, comme des vases, 
ne doit être placé sur l’appareil.
Les conduites Plus est utilisé comme dispositif de déconnexion. La fiche de l’appareil ne doit pas être 
obstruée OU doit être facilement accessible pendant l’utilisation. Pour être complètement déconnecté de 
l’alimentation électrique, le cordon d’alimentation de l’appareil doit me débranché.
Un appareil avec une borne de terre doit être branché sur une prise de courant en étant relié à la terre.

Sécurité Design

 

Cet appareil est livré avec un cordon amovible cordon. Pour le fonctionnement d’un fusible de 220V 
3.15/S/2, 5A/S/3, 5A/S/5 est montée dans la douille, pour le fonctionnement de 120V un fusible de 
6.3A/S/2, 9A/S/3, 9A/S/5 est monté. Si le fusible doit être remplacé utilisation un fusible similaire  
approuvé pour ASTA ou BSI normes 362. Ne pas utiliser sans le couvercle de fusible en place. Les  
couvercles de rechange sont disponibles auprès de votre distributeur

FCC STATEMENT

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
 

(1)  This device may not cause harmful interference, and 

 

(2)   This device must accept any interference received, including interference that may cause  

undesired operation.

NOTE:

 

This equipment has been tested and found to comply with the limits for a Class B digital Device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the  

instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will 
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the 

following measures:
Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

 

                 

Содержание No. 25


































Отзывы: