REL Acoustics HT-Air Wireless, Руководство по эксплуатации

Страница: 8 / 12

Now that the HT-Air™ Wireless transmitter and receiver are
connected to your system, the unit will need to be paired.
1 Make sure that the transmitter AC to DC wall plug supply
is connected to an AC outlet, and that the barrel connector
is connected to the transmitter.
2 Make sure that the receiver AC to DC wall plug supply is
connected to an AC outlet, and that the barrel connector
is connected to the receiver.
3 Make sure that the sub is plugged into an AC outlet using
the supplied AC cable and that the sub is turned on.
Power switch is located on the rear panel.
4 At this point the transmitter and receiver should find
each other and pair together. This will be indicated by
the “Pair” LEDs on both the transmitter and control
panel staying lit (no flashing).
5 In the event that the transmitter and receiver do not
automatically pair, simply exercise the momentary “Pair”
button on the receiver until the LED flashes.
6 Then exercise the “Pair’ button on the transmitter.
Pairing