REL Acoustics HT-Air Wireless, Руководство по эксплуатации

Страница: 6 / 12

The REL HT-Air™ Wireless is intended to be used with the
SerieHT or similar REL sub bass system. The transmitter and
receiver will require power from an AC wall plug using the
power adapter cable supplied.
It is not possible to use the HT-Air™ Wireless connection
and a direct connection simultaneously. Using both wired
and wireless connections simultaneously could result in
damage and voids all warranties.
Always switch your system off before disconnecting any wires.
With the REL SerieHT, there are two basic ways to connect
and setup. The first is a single channel input from the sub
out of a theater or power speaker system. In this case a
single RCA cable is need and the CROSSOVER control can
be set to LFE since the source will have an internal upper
frequency limit.
Connecting Up