Doc ID: 191-6300B
Doc Rev: 101722
Pg. 19
ADJUSTING THE INSTALLED GAP
After checking for Free Play Gain, you may need to adjust
the installed gap. If the Free Play Gain is optimal, continue to
“Breaking-In the New Clutch”. If the Free Play Gain is not
optimal, the installed gap needs to be adjusted.
The installed gap should be fine-tuned in small increments
and then recheck Free Play Gain. Refer to the table below to
set the proper installed gap based on your Free Play Gain.
Notes: If you are unable to obtain the correct Free Play Gain
or you are nearly out of cable adjustment after performing
the adjustment, your cable may be worn or stretched from
wear or use. If this is the case, the cable should be replaced.
Содержание RadiusX Clutch
Страница 14: ...Pg 14 Doc ID 191 6300B Doc Rev 101722...
Страница 22: ...Pg 22 Doc ID 191 6300B Doc Rev 101722...
Страница 44: ...Pg 14 Doc ID 191 6300B Doc Rev 101722...
Страница 52: ...Pg 22 Doc ID 191 6300B Doc Rev 101722...