25
2.
INSTALLING & REPLACING THE BATTERY
Place the remote control face down, press down on the ridged area of the battery
cover and pull towards you to remove the tray. Place one CR2025 lithium button-
cell battery on the tray with the positive “+” side facing you. Reinsert the tray.
3.
GETTING STARTED
3.1 Put the digital photo frame on a flat, stable surface, then plug one end of the
AC adapter into the DC IN slot on the frame and the other end into standard
100–240V AC electrical outlet
3.2 Remove the protective film covering LCD.
3.3 Remove the plastic battery insulator from the battery compartment and
make sure the remote control has a battery inside. Please refer to “Installing
& Replacing Battery” if you need a new battery.
3.4 Press the
Power
button on the Remote Control or the power key on the unit
