REITZ Design KXE, Оригинальное руководство пользователя

Страница: 99 / 128

Maintenance
Operating_Manual_Fan_KXE_04_en.docx
99 / 128
There are four variants of bearing:
Lubricant Bearings For re-lubrication
intervals and oil
quantities, refer to
chapter …
Grease Single bearing 13.2.1
Grease Multiple bearing block 13.2.2
Oil Single bearing 13.2.3 and 13.2.5
Oil Multiple bearing block 13.2.4 and 13.2.5
Specifications for the respective bearing can be obtained
from the following sources:
- On the corresponding information plate on the fan
- On the fan data sheet
- In the spare parts list
The information plate on the fan relays the following
specifications:
- Bearing type and bearing size (e.g. 22216 KC3)
- Lubricant (grease type or oil type)
- Re-lubrication intervals
- Re-lubrication quantity
- Oil change intervals
- Oil quantity
All variants of bearing are described in this operating manual
in their own respective chapter.
The optimum oil level is between the “min.” and “max.”
markings. If the system features an oil inspection glass,
filling up to half way is the optimum level.
ATTENTION!
Harmful to the environment!
Dispose of all exuded lubricants in an environ-
mentally-friendly manner, and in accordance with the
requirements of the respective country of use.
13.2 Bearings
Table 13-3 Variants of bearing
Fig. 13-1 Single bearing
Fig. 13-2 Multiple bearing block