REITEL UNICUT, Руководство по эксплуатации

Страница: 3 / 15

3
1 Equipment
1.1 Basic Equipment
•
Model saw UNICUT
•
Halogen lamp 10 W
1.2 Special Accessories
•
Reference: 22802 Diamond cutting blade, s = 0,25, D = 80
•
Reference: 22804 Diamond cutting blade, s = 0,25, D = 100
•
On request: Carbide cutting blade, 120 teeth, s = 0,30, D = 80
•
On request: Diamond cutting blade, fine, s = 0,20, D = 80
•
Reference: 22816 MT Model table MODEL TRAY ®, with suction adaptor
•
Reference: 22805 Model table, offering a tilt angle up to 90°, with magnetic retention
•
Reference: 20308 Laser Guide for model adjustment
2 Safety Instructions
2.1
General Safety Instructions
•
Check all hose joints for tightness, if necessary, tighten hose clamps.
•
Operating instructions must be read and followed by all personnel who use this device
•
Furthermore, personnel should follow all local safety rules.
•
To avoid injury, appropriate protective clothing, noise absorption, protective eyewear and
other tools have to be used.
•
If the machine is defective or working improperly it must be taken out of service. Call your
dealer immediately then.
•
This device has been designated to be used only for its intended purpose. All other
applications must be prohibited for safety reasons.
•
In case of danger turn off the machine and call your dealer or manufacturer for help.
•
This device should not be left running while unattended.
•
Turn all power sources off after having finished work.