REITEL Polymat, Руководство по эксплуатации, Страница: 2 / 20

II
Dear Customer!
The POLYMAT is designed for polymerisation of common synthetic materials. The curing
process is adaptable to the specific material within a temperature range up to 100°C / 212°F
(120° / 248°F temperature extension optionally available), pressure up to 6 bar and time up
to 120 min. The corrosion resistant stainless steel tank is easy to clean and free from
oxidation and efflorescence. Additionally the heating outside the stainless steel tank is free
from wear and ensures durability.
Any other use or usage beyond this scope is considered unintended use. The manufacturer
shall not be responsible for any damages that may result thereby.
Prior to installation of the device operating instructions and especially the safety instructions
must be read and followed by all personnel who use this device.
After having unpacked the device, please check carefully whether transportation damages of
any kind have occurred. If that is the case, the carrier or manufacturer must be notified within
3 days. The company will not be responsible for any damages found after that.
These operating instructions must be read and followed by all personnel who use this device.
To ensure quick access we recommend to keep it at a safe place near the device. In case of
loss it can be ordered from the manufacturer.
.