Reiner P5-S., Инструкция по эксплуатации

Страница: 8 / 20

7
2. Printing material
For the best results, use material that is porous, clean, non-greasy,
dry and at the same temperature as the print head.
Before carrying out a large print job, perform a test print.
3. Storage

Fig.
A
+
B
Ink is fast-drying. The time it takes the print nozzles 6
to dry up depends on the ambient temperature
and the humidity.
Where the device is not equipped with a nozzle cover, protect
the printing cartridge
2 against drying out with the dust cover
3
when interrupting work.
To securely close the nozzles 6 of the printing cartridge
2
,
keep the seal at the dust cover
3
free from dirt and dust.
f
Remove the printing cartridge
2
out of the device.
f
Guide the printing cartridge into the dust cover 3 .
f
Push the printing cartridge back until the latching wing
4
clicks.
Use the print head within four weeks after opening.