jetStamp
792/792 MP
77
GB
5. Maintenance
5.1. Replace Cartridge
When using special ink (MP), observe the notes in the operating instructions.
CAUTION
Health risks if ink is swallowed.
f
Don’t swallow!
f
Keep cartridge out of the reach of children!
Replace Cartridge
Fig.
C
+
E
f
take
jetStamp
792 from base station
4
.
f
Press [MODE] until [INKJET] appears in the display menu bar.
f
Press [INKJET].
The print carriage moves into a central position.
f
Push the locking rail
7
as far back as it will go.
f
Take the old cartridge
6
out of the print carriage.
f
Take the new cartridge
6
from its packaging and remove the protective film
18
from
nozzles
16
or clip.
f
When using standard ink hold the small felt pad
17
that is provided, against the cartridge
nozzles
16
until some ink appears on the felt.
f
Insert cartridge
7
at handle bar
10
in print carriage.
f
Pull the locking bar
7
forward again until it locks into place.
f
Press [INKJET].
The print carriage moves to the stamping position.
5.2. Clean Cartridge Contacts
Clean Cartridge Contacts
Fig.
A
+
C
+
E
In rare cases, contamination at the cartridge contacts
18
may cause defective print results.
f
Remove cartridge
6
.
f
Clean cartridge contacts
18
at the cartridge
6
and the printing carriage with a soft cloth
that may have been slightly moistened with ethanol (spirit).