Reiner jetStamp 1025, Руководство по эксплуатации

Страница: 57 / 83

The PCset graphic software application 57
© ERNST REINER GmbH & Co. KG
Originalanleitung
Repetitions Indicates the number of repetitions of a print image. If, e.g., the
value 3 is set, the numbering machine remains on the same
number for three imprints before it counts on.
The repeat factor can be set from 0 to 99.
The numbering machine switches on at the value 0.
Downwards The numbering machine can count up (e.g. 10,11,12,...) or down
(e.g. 10,9,8...).
Leading zeroes Leading zeroes can be suppressed or printed (e.g. 5 or 0000005).
The number of printed digits depends on the maximums value set
at "number circle".
5.7.3.1.2 Number circle
The number circle defines the value range in which a numbering machine counts.
When the maximum or minimum value is reached (for upwards or downwards
counting numbering machine), the count is continued at the respective other end of the scale.
Function Description
Minimum This value marks the lower limit of the number circle.
Maximum This value marks the upper limit of the number circle
Numbering machine status The current counter reading can be set within the defined value
range.
5.7.3.2 Context menu numbering machine object
If a numbering object is inserted (" Objects "), the configuration corresponds to the default settings
(" Presettings "). Each numbering machine object can be changed individually via the context menu.
To open the context menu, right-click the desired numbering machine object.
The context menu opens as in the following figure: