Reinecker Videomatic VEO, Руководство пользователя

Страница: 15 / 34

1
3
III. Installation of the system
Your Videomatic system will normally be unpacked and set up by the
supplier’s representative. If you have not purchased a Videomatic stand
that fits to the product you must provide a solid surface for the system
with sufficient surface area.
Note: DO NOT remove the CCTV unit by holding it by the xy-table.
Connection of unit
Connect the power supply to a mains wall socket and plug the adapter
end of the cord into the DC12V power supply socket located on the base
of the Videomatic VEO.
Note: The delivered power cable is to be used exclusively in connection
with the Videomatic VEO.
Once the device is plugged in, it is ready to use.
power input power cable
Power outlet