PORTA
GANTRY®
31
Dimensions
Beam Height Adjustment
The height of each gantry beam
is easily adjusted by the release
of 2 bolts on each upright and
can be easily and safely raised
into position by increments of 7”
or 6” depending on product.
To assist with this activity a
Ratchet system is provided for
the larger gantries; manual on
smaller frames.
Beam length
Beam adjustment
Clear operating span
Height to lifting eye
Height increment
Height to top of beam
Width
Height to top of roller
A
A
E
B
F
F
C
C
G
H
H
D
G
D
B
E
PORTA
GANTRY
11000
Product
Code
A
Beam
Length
B
Beam
Adjustment
C
Clear
Operating
Span
Dmax
Max height
to lifting eye
Dmin
Min height
to lifting eye
E
Height
increment
F
Max height
to top of beam
G
Width
Hmax
Max height
to top of roller
Hmin
Min height
to top of roller
Fall Arrest
Capacity** No.
of Person(s)
Personnel
Lifting [lb]
Castor
Diameter
Beam
Profile
Weight
[lb]
Capacity [lb]
11000
Tall
US-PGSS11000T-15D
15'
8 x 8"
11' 11¾"
13' 3½"
9' 4¼"
6 x 8"
14' 8¾"
6' 7½"
15' 1½"
11' 2¼"
3
5500
8"
10" x 3"
659
US-PGSS11000T-18D
18' ½"
8 x 8"
15' ¼"
13' 3½"
9' 4¼"
6 x 8"
14' 8¾"
6' 7½"
15' 1½"
11' 2¼"
3
5500
8"
10" x 3"
690
**Ratings using ANSI standards. Contact REID for other standards.
Connect the chain block to the shackle on the
cheek plate as shown
Release the load chain until reaching the master
link of the trolley, connecting the hook as shown
1
Operate the chain block to move the trolley along
the beam
2
Shackled Cheek Plates
The cheek plate with shackle pull point offers a
mechanical aid to move the load along the beam
in a control manner.
A chain block is required for this operation with a
minimum capacity of 250kg.
Notes for Correct Operation
Ensure the chain block is attached to the
shackle on the cheek plate, and on the master
link of the trolley.
The movement of the load should be from the
center of the beam to the A-frame where the
chain block is attached.
The load chain will allow for the movement of
the trolley, controlled by the operator using the
hand chain on the block.
Customized Configurations
For customized systems additional assembly
and operation information may be provided as
required.