4 I English
3543
Karl M. Reich Verbindungstechnik GmbH
REICH ®
1
TECHnICAL DATA
Type
3543
Dimensions mm
340/420
Weight kg (without fasteners)
5,25 kg
Contact actuation
Recommended operating pressure
range
4 - 8 bar/
0,4 - 0,8 MPa
Maximun permissible operating
pressure
8,5 bar / 0,85
MPa
Air consumption per driving
operation
5,38 l at 7
bar / 0,6 MPa
Magazine capacity.
no. of fasteners
225-300
Penetration depth setting
no
Fasteners: Wire bound EPAL nail coils
nail length mm
55-100
nail shank Ø mm
2,5-3,8
Recommended lubricant
1 litre special oil. Code no.
9 4420
250 cm3 grasa especial. Code no.
68 3868
2
nOIsE/VIbRATIOn InFORMATIOn
Noise characteristic values *
3543
A-weighted single-event emission
sound pressure level at work
station L pA, 1s
89 dB(A)
A-weighted sound power level
L WA, 1s, d
102 dB(A)
Vibration characteristic values **
Weighted r.m.s.-acceleration (a)
5,35 m/s2
The noise level when working can exceed 85
db (A).
Wear ear protection!
* Measured values determined according to
En 12549:1999.
** Measured values determined according to
IsO 8662-11:1999.
3
suPPLIED WITH
1 Coil nailer
1 Tool use and safety instructions
1 Technical data sheet
4
FILLInG THE MAGAZInE
Only those fasteners specified under technical data
(see 1) may be used.
When filling the magazine, hold the tool so that the
muzzle is not pointing towards own body or towards
any other person.
Do not load the tool with fasteners with the safety
yoke or trigger depressed.
To open the magazine, open the guide flap (416)
using the notch lever (414) and swing open the
magazine (426). The spring mounted support plate
(430) can be adjusted and fixed at 4 levels (a scale for
the corresponding nail lenghts can be found in the
magazine). Insert the nail coil in such a way that the
beginning of the coil is in the driver channel. Close the
magazine and lock the guide flap.
5
ACCEssORIEs
Code No.
balancer for 30-55 n (3.0-5.5 kp),
cable travel 2.0 m (6.5 ft)
28 6478
