10
PA OPERATION (microphone sold separately)
Connect a PA microphone into the 4-pin connector. Microphone has priority over
all other audio modes and mute’s the source audio being played when keyed.
When the PA is triggered, the front display will show MIC, until the trigger is
un-keyed. Any digital media being played at that time will be sent a PAUSE
command. Once released, it will return to the previous source mode at the
previous volume level. Any digital media will be given a PLAY command.
The PA operates regardless of radio status, as long as both ACC and Battery
power is applied to the radio.
When set to CARBON mode, the volume of the PA is only adjustable on the
microphone itself. When set to DYNAMIC mode, the volume level is adjustable
only when keyed from the front using the VOL/SEL button.
A rear view of the radio’s PA pin connection option is shown below:
Carbon PA
Dynamic PA
iPod® and iPhone® are trademarks of Apple Inc., registered in the U.S. and
other countries. Functionality may vary by model number, operation is not
guaranteed.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by REI under license.
11
7
6
1
2
5
3
4
9
8
OPTIONAL REMOTE CONTROL
*Requires using an external IR extension cable sold separately.
(1)
Power Button
(2)
Language Button (N/A)
(3)
Menu Button (N/A)
(4)
Volume Up/Down Buttons
(5)
Enter Button (N/A)
(6)
Scroll Buttons
(7)
Setup Button
(8)
Mode Button
(9)
Playback Buttons
