8
USB OPERATION
Connect a USB storage device to the unit. The radio will automatically switch
MODE’S and begin playback after the media is successfully loaded. Use the
SEEK UP/DOWN buttons to change tracks. use the FOLDER UP/DOWN
buttons to select the desired folder for playback.
Press this button to REPEAT ONE, DIR, ALL, or NONE
Press this button to turn RANDOM ON/OFF
Press this button to PAUSE/PLAY the media
1.
USB Detect
Display when a USB device is connected to the unit. Provides 1.5A charge current
when connected to compatible devices.
2.
Shows the Track, Folder and ID3 tag information file
Press the DISPLAY button cycle from Title, Artist, Album or track information.
3.
Playback Mode of Operation
Displays when RANDOM Mode is active.
4.
Playback Mode of Operation
Displays when REPEAT Mode is active.
SUPPORTED AUDIO FILES (MP3/WMA using ISO9660 formatting FLAC/AAC/M4A/WAV)
Format
Bit rate
Sampling
Frequency
Bit count
AAC-LC (.m4a)
MPEG2/4 AAC LC
HE-AAC(V1,V2)
8 – 320kbps, VBR
16 – 48 kHz
16 bit
MP3 (.mp3)
MPEG 1/2 Audio Layer 3
8 – 320kbps, VBR
16 – 48 kHz
16 bit
WMA (.wma)
Windows Media Audio
Standard L3 profile
(Version 7,8,9)
8 – 320kbps
16 – 48 kHz
16 bit
Linear PCM (.wav)
RIFF waveform Audio
Format
16 – 192 kHz
16 bit/24 bit
FLAC (.flac)
flac
16 – 192 kHz
16 bit/24 bit
13
INSTALLING THE RADIO
1.
Place the DIN collar into the dash opening. Bend the tabs outward as shown on
the drawing below to lock into place.
2.
Pass the harness and antenna cable through the DIN collar, and connect to the
back of the radio. Verify clearance; then gently insert the radio into the DIN Collar
until both spring clips are locked into place.
