7
Adjust the screw pins height to align the monitor bracket. An unaligned monitor bracket can
prevent the opening and closing monitor cycle works correctly and can reduce the useful life.
Connect the power cord (Faston 2 pins) and then connect the video signal cable (BNC).
Cover this connector to prevent short-
circuit with the vehicle’s chassis. This could produce
image distortion.
Note: Some monitors have JPT connectors. Whenever the case, use the table 01 to
assist you with these connections. (See table 01)
Install th
e monitor to the bracket fixed in the vehicle’s ceiling, tighten the screws (M4 Phillips)
that are included within the packaging.
Place the finishes over the screw holes.
Remove the screen protector film.
Table 01:
POWER AND VIDEO CONNECTOR JPT 4 PINS
Pin
Function
1
Power Input (24Vdc)
2
Power GND
3
Video Signal
4
Video GND
