6
WARNING:
Discard the packaging
through the local waste material program
in your region.
WARNING:
Discard the packaging
through the local waste material program
in your region.
5
– MOUNTING:
5.1
Fixing the 10.2” Flip-Down Monitor
5.1.1 Unpacking:
Remove the system from its box carefully and its plastic protection.
Remove the plastic bag from the monitor and
place the monitor over a safe surface to avoid
falls.
Remove the screen protector film only when
the installation is finished.
5.1.2 Preparing the installation:
Fix the monitor bracket in the vehicle’s ceiling using screw pins or M6 screws.
Adjust the screw pins height to align the monitor bracket. An unaligned monitor bracket can
prevent the opening and closing monitor cycle works correctly and can reduce the useful life.
Connect the power cord (Faston 2 pins) and then connect the video signal cable (BNC).
Cover this connector to prevent short-
circuit with the vehicle’s chassis. This could produce
image distortion.
Install the monitor to the bracket fixed in the vehicle’s ceiling, tighten the screws (M4 Phillips)
that are included within the packaging.
Place the finishes over the screw holes.
Remove the screen protector film.
5.2
Fixing the 15.4” Flip-Down Monitor
5.2.1 Unpacking:
Remove the system from its box carefully and its plastic protection.
Remove the plastic bag from the monitor and
place the monitor over a safe surface to avoid
falls.
Remove the screen protector film only when
the installation is finished.
5.2.2 Preparing the installation:
Take the monitor bracket that will be installed in the vehicle’s ceiling. This bracket is fitted in
the top of the flip-down monitor.
Fix the monitor bracket in the vehicle’s ceiling using screw pins or M6 screws.
