Rehsler Kuhlsysteme TAE K15, Руководство по эксплуатации и техническому обслуживанию, Страница: 30 / 69

28
OPERATING AND MAINTENANCE MANUAL
Chapter 11 - Setting tables
TAE K15÷K20
The data in this manual are not binding and may be changed by the manufacturer without notice. Reproduction of this manual, even partial, is strictly prohibited.
11.1.3 Dymanic set po int parameters (NBCP1OT ENABLED FUNCTIO N)
11.1.4 En ergy Saving parameters (NOT ENABL ED F UNCTION)
11.1.5 Compresso r parameters
11.1.6 F an parameters
11.1.7 Antifreeze support resistance parameters
11.1.8 Defro st parameters (NOT ENABL ED F UNCTION)
11.1.9 Alarm parameters
11.1.10 LASER p arameters (NOT ENABLED FUNCTION)
CF44 U Default bottom displaying of remote terminal:
• 0 = BEWOT .
• 1 = BTWOT .
• 2 = none.
• 3 = BAT1 .
• 4 = unit setpoint
• 5 = unit status (**)
• 6 = Laser set
• 7 = none
• 8 = operating differential
0 6 4
Pr2 Password 0 999 -
Parameter Level Description Min. Max. Udm Resolution Factory setting
Pr2 Password 0 999 -
Parameter Level Description Min. Max. Udm Resolution Factory setting
Pr2 Password 0 999 -
Parameter Level Description Min. Max. Udm Resolution Factory setting
EVAPORATOR UNLOADING
CONDENSER UNLOADING
Pr2 Password 000 999 -
Parameter Level Description Min. Max. Udm Resolution Factory setting
HOT START
Pr2 Password 000 999 -
Parameter Level Description Min. Max. Udm Resolution Factory setting
Ar03 U Antifreeze alarm set Ar01 Ar02 °C
°F Dec
Int 3°C
38°F
BOILER FUNCTION (NOT ENABLED)
Pr2 Password 000 999 -
Parameter Level Description Min. Max. Udm Resolution Factory setting
Pr2 Password 000 999 -
Parameter Level Description Min. Max. Udm Resolution Factory setting
Pr2 Password 000 999 -
Parameter Level Description Min. Max. Udm Resolution Factory setting
Pr2 Password 000 999 -
Parameter Level Description Min. Max. Udm Resolution Factory setting