![REHM TIGER DIGITAL 180 AC/DC ULTRA Скачать руководство пользователя страница 54](http://html1.mh-extra.com/html/rehm/tiger-digital-180-ac-dc-ultra/tiger-digital-180-ac-dc-ultra_operating-instructions-manual_1434897054.webp)
Commissioning
54
12.6 Guidelines for working with welding current
sources
Only qualified or specially instructed persons who are familiar with the equipment
and the process may be assigned with welding work. When welding always wear
protective clothing and take care to avoid other persons who may be in the
vicinity from being endangered. After finishing the welding work the unit should
be left switched on for a few minutes so that the fan continues to run and residual
heat is removed from the unit.
12.7 Connecting the welding leads and the torch
REHM TIG welding systems are equipped with quick connection devices for
connecting the grounding cable and the TIG welding torch as well as the
electrode cable. The connection is made by inserting and turning to the right. The
protective gas hose is connected to the welding unit via a quick coupling. The
torch trigger connector is inserted into the 19 pole socket.
Important!
To prevent unnecessary energy loss during welding ensure that all welding line
connections are tightened and well insulated.
12.8 Connection of external components
The connection of external components is achieved via the standard 19 pole
remote control socket on the front side of the TIGER DIGITAL. REHM
accessories are available for this purpose as described in Section 17.
Only external components listed in this guide may be used. If external
components other than those listed are used, the manufacturer’s warranty is
void.
Important!
When using the 19 pole remote control socket ensure that the guidelines for the
use of serial bus systems are met. Particularly the regulations on
electromagnetic compatibility (EMC). Use only the accessories provided by
REHM.
To ensure that the initialisation of the external connections is always reliable, first
the TIGER DIGITAL power supply switch and then the external devices are
switched on.
Содержание TIGER DIGITAL 180 AC/DC ULTRA
