REHM BARRACUDA 105i Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 36

background image

3

Preface

Preface

Dear Customer,
many thanks for purchasing the

REHM-

Plasma cutter.

REHM-

Plasma cutters offer the highest level of quality, technically optimal solutions and an excellent price-

performance ratio. Continuous further developments and product innovations guarantee state-of-the-art
technology and safety at all times.
Before commissioning, please read these operating instructions thoroughly and ensure that you are familiar with
the welding device. Make sure that all persons operating the welding device have read and understood the
operating instructions beforehand. Keep these operating instructions carefully in the area of the welding device.

Informations

The operating instructions include indications for safety-relevant and proper installation, operation and
maintenance of the welding machine. The continuous observance of all notes included in this manual guarantee
the safety of persons and of the welding machine.
The manual determines the intended use of the machine and includes all necessary information for its economic
operation as well as its long service life.
In the paragraph „Maintenance“ all maintenance works and functional tests are described which the operator must
perform in regular intervals.
The illustration and information included in the present manual can possibly deviate from the current state of
construction of your welding machine. Being the manufacturer we are continuously seeking for improvements and
renewal of the products. Therefore, changes might be performed without prior notice. The illustrations of the
welding machine may be different from the illustrations in these instructions with regard to a few details. However,
this does not have any influence on the operability of the welding machine.
Therefore, no claims may be derived from the indications and descriptions. Changes and errors are reserved!
Your suggestion with regard to these operating instructions are an important contribution to optimising our work
which we offer to our customers. For any questions or suggestions for improvement, please do not hesitate to
contact our service department.

If you have any questions after reading these operating instructions or if you cannot solve a problem with
the help of these operating instructions, please contact your specialist dealer.

REHM GmbH u. Co. KG Schweißtechnik

BARRACUDA 45i

BARRACUDA 125i

«
1
2
3
4
5
...
»

Содержание BARRACUDA 105i





































Отзывы:

Нет отзывов

Похожие инструкции для BARRACUDA 105i

Бренд: Parklio Страницы: 29

Бренд: Dahua Страницы: 18

Бренд: 2N Telekomunikace Страницы: 12

Бренд: Innovative Technology Страницы: 14

7.4VOLT HEATED GLOVES

Бренд: Mobile Warming Страницы: 6

Бренд: samet Страницы: 2

Бренд: Abus Страницы: 2

Бренд: Telefunken Страницы: 41

Бренд: Beta Three Страницы: 11

Бренд: Miller Electric Страницы: 40

Бренд: HALDER Страницы: 2

Бренд: ItsImagical Страницы: 18

Бренд: Redback Страницы: 2

Бренд: EAW Страницы: 2

Бренд: Hasler Страницы: 78

Listening System PLS-900

Бренд: Listen Страницы: 2

DVR-9404~9408~9416

Бренд: Mace Страницы: 142

Бренд: QFX Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды