REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual BASIC LIGHT 10
SERVICE MANUAL
BRAKE WITH CLAMP
YOU HAVE TO ADJUST THE BRAKE WHEN THE WHEELS ARE PROPERLY INFLATED (except solid tyre)
Loosen the two bolts
A
of the clamp
B
.
Now you can slide the brake frontward/backward through the clamp and/or the clamp along
the frame. At the same time, you can turn the clamp on the frame and the brake on the
clamp.
Position the brake-knurled rod
C
at a distance
D
of a few millimetres and parallel to the
ground.
Temporarily tighten the two bolts
A
and try the brake out to check if the adjustment is good.
If necessary, repeat the same operation to reach the good adjustment.
A good adjustment has the brake not too hard to engage but braking, so you will have to find
the suitable compromise.
Once reached the correct position, tighten the bolt
A
.
Carry out the same operation on the other side.
Make sure that the clamp’s teeth grab the brake rod’s teethed or knurled surface.
In order to tighten the clamp correctly, screw the bolts alternatively every quarter of a turn.
B
A
Knorled or toothed side
of the rod
